Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Strider Aluminum Wheelset w/Tires & Tubes
$59.99
Kids wearing out their Strider? That's a good thing! Upgrade their out-of-doors adventures with these aluminum wheels. These lightweight 12-inch wheels are a great upgrade for trail riding and come with tires and tubes.
Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Giant SLR 1 42mm Carbon Road Wheels 700c Rear
$798.00
Made with ultralight composite rims, this pro-level mid-profile aero WheelSystem is a great all-around weapon for sprinting to the podium or a solo attack on a ride in the mountains. The SLR 1 42 is a fine balance between efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 42mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell, with pawl based driver system - 1466g per pair
Strider Ultralight Replacement Wheel
$15.00
• Strong Custom Strider Rim • Durable No-Flat Tire • Tread pattern and bearings matches the ST-4, and will fit on any ST-Model
Giant SLR 1 30mm Carbon Climbing Road Wheels 700c Rear
$735.00
Power up climbs. Descend with speed and confidence. Stiff, superlight, and built with proprietary technologies, the SLR 1 30 delivers efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 30mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell, with pawl based driver system - 1380g per pair
Giant SLR 1 30mm Carbon Climbing Road Wheels 700c Front
$609.00
Power up climbs. Descend with speed and confidence. Stiff, superlight, and built with proprietary technologies, the SLR 1 30 delivers efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 30mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell, with pawl based driver system - 1380g per pair
Quality Wheels Formula / Alex Y2000 26-inch Front
$59.95
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
Quality Wheels Formula 130mm Freehub / Alex Y2000 Silver 700c Rear
$79.95
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true. - 25mm external rim width
Spank Oozy Trail 345 Wheelset
$649.00
Up your width, up your traction, up your stoke! SPANK Industries’ OOZY Trail 345 Wheelset is hand built and trued to industry leading standards. 32H straight-pull OOZY Trail Hubs offer increased engagement and adaptability, and utilize unique over-sized SSL (single spoke length) flanges to improve contact and support between spokes, delivering enhanced stiffness, durability, and spoke torque retention. Laced with Spank’s 30mm internal width OOZY Trail 345 Rims, the OOZY Trail 345 Wheelset combines the strength and rigidity of SPANK’s patented Oohbah reverse-well rim profile with the unparalleled tubeless performance of Bead Bite anti-burp rim hooks. The result is a wide-set, bombproof wheelset that’s both lightweight and comfortable on any terrain. - Key technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Freehub: alloy - Shimano (XD available) - Adapters Included (mm): FRONT: 20x110 REAR: QRx135 - Adapters Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Tubeless: Tubeless equipped (tape & valves included) - Discipline: trail
Mavic Crossmax 29-inch Front
$178.55
The name Crossmax is synonymous with XC riding and racing. This new tubeless-ready wheel boasts many of the same features and technologies as premium XC race wheels, but at a more attainable price. One of the key factors is Mavic's UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The new rim design features a 22mm internal width with a hookless profile. The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by Mavic's TS-2 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with optional adaptors.
Spank Spike Race28 Wheelset (26-inch)
$399.00
Spank's DH-dialed, competition-ready Spike Race 28 wheelset is light and tough, perfect for the demands of modern riders and World Cup courses. Dynamal rims use Spank's OohBah design for acceleration-enhancing stiffness and low weight. The 28mm-wide rims provide a wide, stable tire footprint that grips the corners like nothing else. BeadNip tech is tubeless ready and locks tire beads into the rim, making tubeless installation a breeze. Smooth-rolling Spank hubs feature six-bolt rotor compatibility, CNC-machined freehub body, and the rear hubs are available in your choice of 135mm or 150mm spacing.
Spank Spoon 32 27.5-inch Wheelset
$429.00
- Bombproof all-purpose wheelset, hand built, 32H J-hook configuration with 3-cross spoke pattern - The corrugated rim center, a brand acclaimed technology, makes it more rigid and allows the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable - Delivers exceptional strength and stiffness at a value unmatched in its class.
Race Face Aeffect Plus Rear
$324.99
Built to allow a rider to tap into the maximum traction and new capabilities of Plus bikes and adventure riding, the Aeffect+ wheels incorporate a new Race Face Trace hub design with full cartridge bearings for extended life and durability. The hub also boasts a competitive 9.2-degrees of engagement using a durable the 3 pawl design. These hubs are tough, think a Clydesdale with a motor kind of tough. Aeffect wheels can handle almost anything you can throw at them. - Brushed finish, water transfer graphics - One spoke length throughout wheelset - Rim decal kits available separately in 8 colors (sold separately) - 9.2-degree hub engagement - Standard 6 bolt brake rotor mount - Extra spokes (5) included with rear wheels - Straight pull Double Butted spokes with Silver Brass nipples
Gusset Black Dog 20
$75.95 - $79.95
- Gusset's bestselling BMX, dirt jump and street use wheels - Black Dog 32mm 6061 alloy double wall rims with loose-ball alloy hubs, black spokes - Flip/flop freewheel threaded rear - Heat treated CrMo axle with room for pegs
Campagnolo Zonda Disc Brake Wheelset
$920.00 - $925.00
Campagnolo Zonda Disc Wheels are a benchmark for all aluminum disc brake wheelsets. It features a completely redesigned structure specific to bicycles with disc brakes. The result is all-round improved reactivity, especially thanks to the asymmetrical rims and Mega G3 hubs on both wheels. This innovative solution provides a stable front wheel that is able to absorb energy from the braking torque generated on the left-hand side and a rear wheel that guarantees maximum power transfer from the cyclist. - Compatible with HH12, QR and 135 and 142 rear hubs. - 6 screws and AFS to ensure full compatibility with every disc available on the market. - The front wheel also features G3 technology for top performance even during very powerful braking.
Easton EA70 AX 650B Rear
$349.99
Find the road less travelled on the new EA70 AX. Joining forces with the EA70 and EC70 AX Bar in our AX adventure road line, the new EA70 AX wheel has the durability to withstand trail riding but is translated to drop bar applications with center lock hubs and 11-speed road compatibility. From bikepacking adventures loaded with gear, to washboarded gravel descents with only your wheels and tires providing the compliance, we have you covered. The welded tubeless ready rim boasts a generous 24mm internal rim width that increased tire volume and gives an optimal tire profile for 35 to 50C tires. It’s the perfect wheel to round out any adventure drop bar build.
Stan's NoTubes Major S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Major S1 Wheelset - Use: Plus Tire Adventure and Trail - Internal Rim Width: 38mm - Optimal Tire Size: 3.0 to 3.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (2,030g), 27.5-inch (2,094g), and 29-inch (2,198g).
Mavic XA Pro Carbon 29-inch Rear
$953.95
Save energy on the climbs and rail rugged descents with higher speeds and total control. Mavic engineered the XA Pro Carbon to be significantly lighter and laterally stiffer than any aluminum wheel, but also retained the impact resistance and vertical compliance that gives Mavic Wheel-Tire Systems the ride quality they’re known for. The XA Pro Carbon is the lightest wheel system in its category (1490g for 27.5” and 1535g for 29”). So you know it helps you climb and accelerate faster, but where it really shines is in the way it handles rough and challenging terrain. Mavic engineered a wide 26mm hookless rim profile that’s fully UST Tubeless compliant for improved traction, puncture resistance and ease of use. These asymmetric rims are fine-tuned to optimize spoke tension and they use 24 double-butted steel spokes to find the sweet spot between lateral stiffness and vertical compliance. Hubs are 6-Bolt only and compatible with all current axle standards including Standard and Boost.
Race Face Aeffect R 29-inch Rear
$324.99
Boasting a 30mm internal rim width and increased strength, the Aeffect R is built to shred aggressive all-mountain trails and Enduro races. In addition to a great rim, the Aeffect R incorporates a new Race Face Trace hub design with full cartridge bearings for extended life and durability. The hub also boasts a competitive 9.2-degrees of engagement using a durable the 3 pawl design. These hubs are tough, think a clydesdale with a motor kind of tough. Aeffect wheels can handle almost anything you can throw at them. - Brushed finish, water transfer graphics - One spoke length throughout wheelset - Rim decal kits available separately in 8 colors (sold separately) - 9.2-degree hub engagement - Standard 6 bolt brake rotor mount - Extra spokes (5) included with rear wheels - Straight pull Double Butted spokes with Silver Brass nipples
Spank Spank 350 27.5-inch Wheelset
$649.00
- Weight optimized wheelset ideal for Trail/AM/Enduro bikes looking for a wide profile - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles
Spank Spike Race 33 27.5-inch Wheelset
$529.00
- High performance alloy wheelset competition tuned for World Cup level DH racers - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - A hand built 32H, 3-cross configuration ensures maximum stiffness and durability offering increased engagement, lighter weight, and improved adaptability - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - 15mm and 20mm axle adapters included for front wheels - Most non Boost adapters available for the rear wheel
DT Swiss HX 1501 Spline ONE 30
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
Quality Wheels Shimano Deore M610 / Alex DH19 26-inch Rear
$120.00
This wheel matches original equipment for Surly Long Haul Trucker.
Spank Spike Race 33 29-inch Wheelset
$529.00
- High performance alloy wheelset competition tuned for World Cup level DH racers - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - A hand built 32H, 3-cross configuration ensures maximum stiffness and durability offering increased engagement, lighter weight, and improved adaptability - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - 15mm and 20mm axle adapters included for front wheels - Most non Boost adapters available for the rear wheel
Stan's NoTubes Arch S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
DT Swiss M 1700 Spline 30
$361.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Front
$1,150.00
If you had to choose just one wheel, the 404 Firecrest should be your choice. With the depth and shape proven in all conditions it's the all-around performer and standard by which all aero wheels are measured. At the center of the wheelset is Zipp's 77/177 hubset, an innovation that results in improved stiffness, durability, simplicity and versatility - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - Each wheel includes Zipp quick release skewer, end caps that can be swapped to run 12mm or 15mm thru axle; 1 Zipp 700c X 20mm rim tape, and 1 Zipp tubeless valve
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,350.00
Road bikes are ever evolving and ever inspiring. The new 404 Firecrest Carbon Clincher Tubeless Disc-brake wheelset offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of SRAM's most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable. The consistency and power of disc brakes provides precision modulation and stopping power, literally at your fingertips. As for speed, the 404 Firecrest is where the Firecrest Revolution began. If you had to choose just one wheel, the 404 Firecrest should be your choice. With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. At the center of the 404 Firecrest Carbon Clincher Tubeless Disc-brake is the durable and versatile 77/177D hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools. - Firecrest rim Technology provides world class handling and stability - 77/177d hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - To ensure compatibility with any bike, the versatile 77/177D hubs come with swappable end caps to work with QR’s and thru-axles - Tubeless ensuring secure performance even when ridden at lower tire pressures. - ISO 4210 compliant. See Declaration of Conformity for details.
Zipp 302 Carbon Clincher Disc Brake 700c Front
$655.00
With a 45mm deep Indianapolis-made carbon rim, optimized for low aerodynamic drag and precise handling in all riding conditions, the 302 Carbon Clincher delivers the ride that Zipp wheels are renowned for at a price that makes Zipp carbon quality and performance more attainable than ever. To keep the wheels light and easy to service Zipp used a center locking brake rotor mounting interface on their 76D/176D hubs. The 76D/176D hubset also features replaceable axle end caps for thru-axle compatibility. Add in the 302’s XDR driver body compatibility, and you have a wheelset that can meet the needs of virtually everyone. And like all of Zipp's carbon clinchers, the 302 uses the same rim bed design that makes tire removal and installation as easy as possible. The 302’s smooth carbon rim is hand assembled to Zipp’s new 76D/176D hubs using Belgian CX-Sprint spokes and brass spoke nipples to build a wheel that is both fast and reliable—tough enough to survive the Spring Classics or the road less traveled, yet light enough to tackle the steepest grades. Experience Zipp speed with the 302 Disc-Brake. Each 302 Disc-Brake Wheel Includes: - Zipp valve extenders - Zipp rim tape
Stan's NoTubes Sentry MK3 27.5-inch Rear
$380.00
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction delivers width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheels are a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. Stan's updated Neo hub includes a stronger axle and reliable Durasync six pawl freehubs. The Sentry MK3 proves wider can mean faster. Sentry MK3 wheels include pre-installed tape for tubeless use and presta valve. - Patented BST design for the easiest and most reliable tubeless - 32mm internal width for stability with wider tires - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
Page 1 of 16 Next page