Lighting

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The Planet Bike Current 500 front white head light is designed to illuminate the path ahead whenever you hop on your electric bike. Whether you’re upgrading the light that came spec’d on your E-bike or adding a front light, the Current 500 is a great choice. The OSRAM LED delivers 500 lumens and the precision fish eye Clean Beam lensing creates a horizontal cut-off beam that won’t blind oncoming cyclists and path users. The sleek, rugged and compact form is constructed of aluminum alloy and mounts neatly to your bike’s fork crown. The mounting bracket’s dual pivot points let you fine tune the beam to ideally project light for a safe ride day or night. The Current 500 includes a Bosch system plug for clean installation into the front light outlet on your Bosch-powered E-bike. Don’t worry if you ride an electric bike powered by Shimano, Toshiba, Stromer and other motor systems because the Current power cable can be modified to work with most systems. Great optics, abundant lumen output, and clean design make Planet Bike's Current 500 a smart choice for E-bike cyclists. Be safer and brighter on the path without blinding your fellow riders! PRECISION BEAM Osram High output LED provides steady 500 lumens with clean beam cutoff lens PLUGS INTO BOSCH DC 6-15V BATTERY Easily plugs into Bosch batteries. Can be modified to fit Toshiba and Shimano batteries. MULTI PIVOT INSTALLATION Get the light where you want it with two pivot point bracket - OSRAM KW H2L531.TE LED provides a 500 lumen high power beam - FL1 Tested - Steady mode (500 lm) - Provides 240 degrees of visibility for daytime traffic and provides optimal lighting for nighttime riding - Clean Beam Design - Precision Clean Beam cut-off lens is designed with your fellow riders in mind. Provides for courteous, anti-glare illumination on the ground ahead of you and not into the eyes of oncoming riders. - Front Fork Crown Mounted - Securely mounts to your E-bike's fork crown with a mounting bracket with two robust pivot points that allow for beam angle adjustability. - Water resistance rated to IPX6 standard - Electric Bike Compatible - Includes a Bosch E-bike system plug for clean installation to Bosch-powered electric bikes. A certified mechanic is recommended for installation on other systems. - Compatible with any 6V-15V e-bike system - Cable length is 56" - 116 grams

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

- High brightness 16 chip COB style LED light - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included - Lumens: 30 - Mount: rubber strap

- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 8

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design

- 24 lumen LED - Built-in Li-Ion USB rechargeable battery - 1.5 ~ 6 hour run time per charge - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant

- 20 lumen safety head light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator

Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

- Modes include High Steady, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 22.5 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged

Highlight your style and light up your ride. These sweet retro-inspired lights mount right to the brake bolt and fit any of our rides drilled for a front brake! - Batteries not included (4 x AAA) - LED lamp, plastic housing, chrome finish - 3 modes: high, low, and flashing - Mounts to handlebars or front brake bolt

FRONT LIGHT: Experience unparalleled illumination and versatility with the Lite Drive 1200+ Front. With eight LEDs, this light has a maximum output of 1,200 lumens and an impressive 60-hour max runtime, providing the best beam pattern for optimal visibility in even the most challenging conditions. Its waterproof USB-C 2A+ fast charging capability allows for convenient recharging(cable not included), while the CNC-machined aluminum construction with cooling fins ensures durability and efficient heat dissipation. The fresh optical design and the MOR(Maximum Optical Reflection) lens optimize light dispersion for enhanced visibility. With the optional GoPro mount and compatibility with the Infinite Light Power Pack+, this front light offers versatile mounting options and extended battery life. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from seven different output modes, from the attention-grabbing Daytime Flash Mode to the long-lasting 60-hour runtime Femto Mode, to suit your lighting needs. Illuminate your rides with confidence using the Lite Drive 1200+ Front. REAR LIGHT: The KTV Drive Pro+ Rear is a compact, aero seatpost compatible rear bike light providing up to 150 lumens and six output modes. It offers up to 20 hours of max runtime and a highly disruptive Daytime Flash mode. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, durable, rigorously tested to IPX7 Waterproofing standards, and an integrated USB stick allows convenient cable-free recharging. - Front Light Max 1,200 lumens / 60-hour max runtime - Front Light Max 1,200 lumens / 60-hour max runtime - Waterproof USB-C 2A fast charging - Daytime Flash mode with Highly Disruptive Pattern - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - Infinite Light Power Pack+ Compatible for extended run times - 3800 mAh battery capacity - Rear Light Max 150 lumens / 20-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

The legendary POW! Blink, Blink, Blink The tail light with the legendary POW! Blink, Blink, Blink has been keeping cyclists safer and more visible for more than a decade. It features long run times, brilliant optics and the unmistakable Superflash™ pattern.

Lezyne helmet mount for LED bike lights or GoPro action cameras. Follows line-of-sight for optimized night riding or recording. Constructed from durable, mold-injected Composite Matrix construction. Easy to install Velcro strap fits virtually all helmet styles. Compatible with a large number of Lezyne headlights via the GoPro LED Adapter. - Composite matrix helmet light mount with strap system - GoPro adapter

- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash. - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 20 hours for front and 10 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

AC adapter for NiteRider Pro 2200 Race, Pro 1800 Race, Pro 1200 Race, MiNewt Pro 770 Enduro, MiNewt Pro 750, TriNewt, TriNewt Wireless and all MiNewt Series bike lighting systems. Please note: Style and color may vary SYSTEM COMPATIBILITY - Pro 2200 Race - Pro 1800 Race - Pro 1400 Race - Pro 1200 Race - MiNewt Pro 770 Enduro - MiNewt Pro 750 - TriNewt - TriNewt Wireless - MiNewt Series

Experience the next level of cycling safety with the Strip Drive 300+ Rear light. This exceptional rear light offers ten LEDs and a maximum output of 300 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. With seven output modes, including highly disruptive Daytime Flash modes, wide-angle optics providing 270° visibility, USB-C waterproof charging(cable not included), and a lightweight yet durable co-molded design, it's the ultimate choice for every cyclist. A versatile mounting system attaches to aero or round seatposts and recharges via a waterproof USB-C connection. - Max 300 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Lightweight and durable co-molded design - Maximum side visibility design - Multiple mounting options with ladder strap - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity

The KTV Drive+ Rear is a compact yet powerful rear light that ensures optimal visibility and safety on your rides. With a maximum output of 40 lumens, an impressive 45-hour runtime in Femto mode, and six different output modes, including Daytime Flash, this rear light provides reliable illumination. The unique design is compatible with aero and round seatposts, ensuring versatility for various bike setups. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, and an integrated USB stick allows convenient cable-free recharging. Rigorously tested to IPX7 Waterproofing standards, it can withstand challenging weather conditions. - Max 40 lumens / 45-hour runtime in Femto mode - Max 40 lumens / 45-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB stick for cable-free recharging - 400 mAh battery capacity

Lezyne replacement mounts for ebike lights.

The KTV Drive Pro+ Rear is a compact, aero seatpost compatible rear bike light providing up to 150 lumens and six output modes. It offers up to 20 hours of max runtime and a highly disruptive Daytime Flash mode. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, durable, rigorously tested to IPX7 Waterproofing standards, and an integrated USB stick allows convenient cable-free recharging. - Max 150 lumens / 20-hour runtime in Femto mode - Max 150 lumens / 20-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

The Zecto Drive 200+ Rear is a low-profile, high-visibility light with an impressive 200 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 650 mAh battery capacity, the Zecto Drive 200+ Rear offers a maximum runtime of up to 35 hours in Femto mode. It also boasts USB-C waterproof charging(cable not included), making it easy to keep it charged and ready to go. - Max 200 lumens / 35-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity

Sleek rechargeable tail light with quick mount strap The Shiner 70 bike tail light has got your back! This unique, high-visibility rear flashing red light makes you more visible to other riders and drivers while out on your ride. Its modern linear design integrates smoothly to your bike whether mounted to your seat post, seat stay, rack, or helmet. The 7 LED PB Power Array™ delivers 70 lumens of broad beam light to make sure you stand out in traffic whether it’s day or night. The rechargeable 440 mAh lithium polymer battery is fast charging and will keep the Shiner 70 rear light powered up for up to 8 hours. Features: FL1 tested run-times - 1.5 hours (High – 70 lumens), 4.5 hours ( Low - 40 lumens) and up to 8 hours (Superflash™ - 70 lumens) Light Patterns - 7 LED PB Power Array™ provides High, Low, and Superflash™ patterns Rechargeable Battery - 4400 mAh lithium polymer battery charges in 2 hours with Micro USB cable Safety Side Lighting - Provides 180° of visibility FL1-rated water resistance - Water resistance rated to IP65 standard Weight - 30 grams

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Rechargeable PB Power Array™ tail light We’ve added a couple cool new features to our popular Grateful Red bike tail light. This new version is powered by a lithium polymer rechargeable battery. For added safety, we’ve integrated a CPSC-certified reflector in the lens to keep you visible even when the light isn’t powered on. Its dazzling bright 28 LED PB Power Array™ and three modes make it like a Scarlet Begonia for the back of your bike. Let it shine, let it shine, let it shine! - PB 28 LED power array and CPSC-certified reflector provide steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm), and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with a micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams

- Modes include High Steady, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up 24 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 12 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

The Blaze® 600 SLX provides high lumen output, generous run times and 275° of visibility. The newest version of our Blaze SLX headlight comes with Clean Beam lensing which creates a horizontal cut-off beam for courteous, anti-glare illumination that won’t blind oncoming cyclists and path users. The beam pattern delivers full-bodied illumination out in front of your bike and back toward your pedals while the lateral light portals make sure you’ll be noticed from the side.

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.

350 lumens packed into an unbelievably compact form, the all-new Hypershot 350 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 350 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 350 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

250 lumens packed into an unbelievably compact form, the all-new Hypershot 250 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 250 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 250 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

AMPP100 The AMPP100 is an eco-friendly rechargeable 100 lumen light. It's lightweight and compact build makes it an ideal choice for all riders. - Compact rechargeable headlight (100 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Two light modes (Constant / Flashing) Run time: - Constant mode 100 lumens:approx 3.5hrs - Flashing mode 100 lumens:approx 35hrs ORB Rechargeable Look no further than the ORB rear light. It's compact, lighweight and neat. With varying flashing modes, the ORB Rechargeable helps you to be seen out on the road. - Lens functions as push-button - USB rechargeable - 3 modes *Charging time: 3.5h - Robust aluminum body - Versatile rubber strap mount Run time: - Rapid flashing :approx 5 hrs - Slow flashing :approx 5 hrs - Constant :approx 2.5 hrs

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 200 - Run Time: 15:00 – 60:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 200 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

The Beamer 80 was born to be an urban warrior! It's super bright to light your way night or day. This compact light provides 80 lumens of high beam power along with Superflash and Courtesy modes. It packs a big beam but is small enough to stash in your pocket between stops. - High output surface mounted LED provides high power beam along with Courtesy & Superflash modes - FL1 Tested - Run times: 6.5 hrs (80 lm), 24 hrs (Courtesy -24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX4 standard - 2 AAA batteries (included) - A3 cam mount adjusts or removes without tools - 63 grams

80 lumen headlight and the classic 3 LED tail light If you’re looking for a compact urban bike light combo set at a great price, look no farther than this pairing. We’ve teamed up the compact 80 lumen Beamer 80 headlight with the bright and super-efficient Blinky 3 tail light. Both front and rear lights boast generous run times and have all the steady and flashing modes you need to be noticed as you explore by bike after dark. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX4 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Blinky 3 specs: - 3 - 5mm LEDs and built-in parabolic lensing provide steady and flashing modes - FL1 tested Run times: 70 hrs (steady – 12 lm), and up to 140 hrs (flash - 12lm) - Provide 140° of visibility - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts plus rear clip for multiple mounting options - 68 grams

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

Engineered for the ultimate road cyclist, the Hotrod™ 90 unleashes a powerful 90 lumens of flashing output for unprecedented night and day cycling safety. Its cluster mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Be seen all the time with 24/7 Safety Technology™, an exclusive set of solid and flashing modes to increase your safety when cycling, night and day. Every bit the road cyclist’s tail light, the Hotrod 90 uses a Versatite™ flexible mount compatible with most seat posts including aero styles. Performance - 90 lumen red tail light with 6 lighting modes engineered for use on roads and commuting - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable, internal battery lasts up to 100 hours - Water-resistant design - 1:30 ~ 100 hr run time - System weight: 35g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles *Features and specs are subject to change without notice.

Engineered with incredible night-piercing power, the Metro Pro™ 1100 unleashes an extraordinary 1100 lumens right through the darkness with exceptional brightness and clarity. Its cycling tuned optics enables an extra-wide, long-range output to maximize your line of sight. Not only limited to night, the Metro Pro’s DayLightning® mode makes you stand out in broad daylight to give you the advantage anytime and anywhere you ride. Patent pending. - Powerful 1100 lumen output with 9 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - Triple Flash - Zoom - DayLightning® - Walking mode) - SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - Micro USB rechargeable, internal battery lasts up to 100 hours - Low battery indicator alerts you when a charge is needed - Rugged, water-resistant design - Side illumination ports highlight your presence to nearby motorists - Light activation lockout prevents accidental light activation - Locktite™ quick-release handlebar mount keeps the light securely fastened to the handlebar RUN TIMES: - Boost: 1:00 hrs - High: 1:30 hrs - Medium: 3:00 hrs - Low: 10 hrs - SteadyPulse®: 4:00 hrs - DayLightning®: 14 hrs - Triple Flash: 22 hrs - Zoom: 4:00 hrs - Walking: 100 hrs - CHARGE TIME: 2:30 hrs (depending on charger used) - MOUNTING: Handlebar - BATTERY: Built-in Li-ion Patent pending. *Features and specs are subject to change without notice.

Made for road cyclists and commuters, the Dice combo provides powerful vision and visibility in the smallest package possible. Fire up the night with the Dice™ headlight's incredible 150 lumens to see clear and far ahead, and stand out in broad daylight with intense lightning-like flashes. To cover your rear, the Dice™ 50 tail light stands out with its powerful and extra-wide 50 lumen flashes. Both lights sense day and night, automatically switching to the optimal flashing mode to maximize your visual presence at all times. Get the most out of your ride with the performance and features packed into this combo light set. Patent pending. Dice™ HL 150 USB Headlight: - Powerful 150 lumen output with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® Low - SteadyPulse® High - DayLightning® Triple Flash - DayLightning® Single Flash) - DayLightning® mode emits powerful lightning-like flashes to highlight your presence in broad daylight - SteadyPulse® mode alerts night time motorists with pulses while constantly lighting your path - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 30 grams - Flexible mount conveniently attaches to most handlebars including aero bars Dice™ TL 50 USB Tail Light: - Powerful 50 lumen flashes with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® Low - SteadyPulse® High - DayLightning® Triple Flash - DayLightning® Single Flash) - Flashing modes emit powerful lightning-like flashes to highlight your presence in broad daylight - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 30 grams - Flexible mount conveniently attaches to most seat posts including aero styles Patent pending. *Features and specs are subject to change without notice.

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights

See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.

3 LED tail light with helmet mount Versatility is the Blinky 3H’s middle name. You can mount it to your helmet with the included self-leveling helmet mount or attach it to your seat post or seat stay. No matter where you choose to mount it, its brilliant illumination will keep you visible on your evening bicycle adventures.

Cute combo set that lights you up The Blinky Safety Set is a brilliant combo set in a super compact package. They clip on to your bike bag or mount to your bike. Where ever you attach them, they get you noticed when you are out and about when the sun goes down.

- 1.5 watt, 100-lumen USB-rechargeable headlight - 4 steady modes and 2 flash settings - Low-battery indicator

- USB-rechargeable rear light with 42 COB LED chips - 7 different modes featuring two steady modes and 5 flashing settings - Innovative quick-release bracket can be attached to seat posts or helmets - Low-battery warning and integrated battery protection - Weighs only 26 grams